Wiki

User Tools

Site Tools

Trace:
esp32_bme280_w_arduino_ide

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
esp32_bme280_w_arduino_ide [2025/03/06 21:23] – brunoesp32_bme280_w_arduino_ide [2025/03/10 15:27] (current) – bruno
Line 1: Line 1:
 ===== ESP32 + BME280 w/ Arduino IDE ===== ===== ESP32 + BME280 w/ Arduino IDE =====
 +
 +
 +[[https://randomnerdtutorials.com/esp32-bme280-arduino-ide-pressure-temperature-humidity/]]
  
  
Line 21: Line 24:
   * Comment lines (ligne 20) ''#include <SPI.h>'' et de ''/*#define BME_SCK 13'' à ''#define BME_CS 10*/'' (line 24 à 27)   * Comment lines (ligne 20) ''#include <SPI.h>'' et de ''/*#define BME_SCK 13'' à ''#define BME_CS 10*/'' (line 24 à 27)
   * Ajouter 0x76 (ligne 46) -> ''status = bme.begin(0x76);''   * Ajouter 0x76 (ligne 46) -> ''status = bme.begin(0x76);''
- 
-/!\ Serial monitor @ 9600 baud 
  
  
Line 36: Line 37:
  
 void setup() { void setup() {
-    Serial.begin(9600);+    Serial.begin(115200);
     while(!Serial);    // time to get serial running     while(!Serial);    // time to get serial running
  
esp32_bme280_w_arduino_ide.1741296239.txt.gz · Last modified: 2025/03/06 21:23 by bruno