Differences

This shows you the differences between two versions of the page.

--- esp32-cam-ch340 [2024/10/22 05:53] – [ESP32-CAM-CH340] bruno
+++ esp32-cam-ch340 [2024/10/28 21:42] (current) – bruno
@@ Line 1: / Line 1: @@
 ==== ESP32-CAM-CH340 ====
@@ Line 11: / Line 9: @@
   * ''const char *ssid = "Your SSID";''
   * ''const char *password = "P4ssw0rd";''
-  * Menu Tools -> Board -> esp32 -> ESP32 Wrover Module
+  * Menu Tools -> Board -> esp32 -> ESP32 Wrover Module <del>(ou AI Thinker ESP32-CAM)</del>
   * Menu Tools -> Partition Scheme ->"Huge APP (3MB No OTA/190K SPIFFS)"
   * Push FLASH, push RST, let RST, let FLASH
   * Menu Sketch -> Upload
   * Push RST
+  * Photo -> ''<nowiki>http://{IP}/capture</nowiki>''
+  * Stream -> ''<nowiki>http:'//{IP}:81/stream</nowiki>''
+  * Variables -> ''<nowiki>http://{IP}/status</nowiki>''
+  * Réglages -> ''<nowiki>http://{IP}/control?var={var}&val={val}</nowiki>''
+    * Framesize -> ''/control?framesize={n}'' avec n = 0 (96x96) -> 13 UXGA(1600x1200)
+  * Sauf XCLK -> ''<nowiki>http:'//{IP}/xclk?xclk={xclk}</nowiki>''
+[[https://randomnerdtutorials.com/esp32-cam-take-photo-display-web-server/]]
+  * Download [[https://github.com/me-no-dev/ESPAsyncWebServer/archive/master.zip]]
+  * Install: Menu Sketch -> Include Library -> Add .ZIP Library...
+  * idem pour [[https://github.com/me-no-dev/AsyncTCP/archive/master.zip]]
+  * Code: [[https://github.com/RuiSantosdotme/ESP32-CAM-Arduino-IDE/blob/master/ESP32-CAM-Take-Photo-and-Display-Web-Server/ESP32-CAM-Take-Photo-and-Display-Web-Server.ino]]
+-> Fonctionne pas :!:
 [[https://microcontrollerslab.com/esp32-cam-take-photo-display-web-server/]]
+[[https://github.com/prusa3d/Prusa-Firmware-ESP32-Cam/blob/master/doc/ESP32-Wrover-dev/README.md#how-to-reset-configuration-to-factory-settings]]